Natural Bamboo Board Side Pressed 7mm

£5.58£113.45 + VAT

Clear

Colour: Natural, unvarnished bamboo ply.

  • Ecological and Sustainable material
  • Ideal for furniture and kitchen counters
  • Untreated, ready to oil, stain or varnish.
  • Surface can be laser engraved and routed.

Description

The boards are untreated and this allows for a choice finish, such as a wood oil or varnish. If you plan on using them in areas where there is splashing and moisture, such as the kitchen or bathroom, we recommend applying a waterproof adhesive to the back of the panel. It is also necessary to apply a protective coating to the front surface such as Danish Oil, for less wet areas or several coats of varnish in high traffic wet areas.

The natural shade allows for wood dyes to be applied as shown in the photos. Seal with a top coat of clear varnish – acrylic base is best.

Board Specifications:

  • Density : +/- 700 kg/m3
  • Top layer thickness / Wear layer: 3,5-5 mm 1)
  • Shrink/Swell bamboo: 0.14% per 1% change in Moisture Content
  • Equilibrium MC: 10% at 20°C and 65% rel. Air Humidity 8% at 20°C and 50% rel. Air Humidity
  • Resistance to Indentation – Brinell Hardness: ³ 4 kg/mm2
  • Reaction to fire: Class D-s1-d0 (EN 13501-1)
  • Formaldehyde emission: Class E1 (< 0.124 mg/m3, EN 717-1) / Class E0 (< 0.025 mg/m3) 3)
  • Modulus of Elasticity: 4530 N/mm2 (40mm) 4) (mean value – EN 789)
  • Glue:D3 water resistant
  • CO2 neutral: LCA report TU Delft (ISO 14040/44)

 

Additional information

Weight N/A
Dimensions N/A
Size

A4, A2, 4ft x 4ft, 8ft x 4ft

Reviews

There are no reviews yet.

Be the first to review “Natural Bamboo Board Side Pressed 7mm”

Your email address will not be published. Required fields are marked *

PLEASE NOTE: This information is to assist with your purchase. Please read carefully.

Bamboo boards and veneers behave in a similar manner to timber hardboards and plyboards.

Storage: Bamboo boards respond to changes in the atmosphere and can absorb moisture from the air. Boards must be stored flat in a dry, warm place. Failure to do so can lead to bowing and in extreme cases mould may begin to develop on the surface.

Variations: There may be colour variations between boards. We cannot guarantee that boards supplied will all be from the same batch. However, with the application of wood oil, the boards will even out in tone.

Product Type: 3mm and 5mm boards are classed as veneers. These are NOT weight bearing materials. They can split, crack or bow. They are designed to be attached to a solid substrate and are relatively fragile. We cannot guarantee their stability if used differently.

For further information regarding how to use a particular thickness of board please read the individual product description OR download the Information Sheet on each page.

Treatments: Our bamboo boards and veneers are untreated and will require sealing with a varnish or wood oil. This will bring out the natural grain and colour of the boards and protect the finished item/area from staining and minor abrasions. You can also use a coloured stain on the boards prior to sealing. Several coats of varnish/wood may be required if the boards are to be used in a high traffic area or where liquids are found, such as the kitchen or bathroom.

Aftercare: If the boards are given the correct initial treatment they need only be wiped over with a damp cloth or duster. For areas or items which have been treated with wood oil, periodic application of a top coat is advised. For varnished boards, no treatment will be required until there is visible wear and tear.